Product selection support
Discuss water conditions, process position and current products.
Source photograph; appearance, grade and supplied packaging follow the agreed product documents.
Disinfection & oxidation
Sodium Dichloroisocyanurate
SDIC / NaDCC
A solid chlorine source for the relevant disinfection procedure, selected by hydration form, available chlorine and equipment requirements.
Confirmed availableBase chemicals
- Chemical identity
- Anhydrous CAS 2893-78-9; dihydrate CAS 51580-86-0. Confirm against the actual product SDS.
- Product form
- Granules, powder or agreed solid format.
Add application & specification details
Application value
Uses and application conditions
Pool chlorine-source & dosing-equipment matching
Use these checks to compare equivalent supply specifications and narrow the candidate range for your actual process.
Specification & document coordination
Align specification basis, test methods and grade-specific documents.
Packaging & supply coordination
Review quantity, packaging and destination requirements.
Specifications & selection
Specifications and order requirements
Discuss your current grade or operating conditions. ENVO codes identify sales requirements; manufacturer grades, supply specifications, test methods and document versions are confirmed for the selected product.
ENVO-SDIC-SSolid enquiry reference
The legacy catalogue lists 56%/60% under “Purity”; available-chlorine basis and hydration require the current technical document.
Application conditions & technical scope
Distinguish product-component assay from available chlorine and state hydration form. Follow the specific product's end-use documents for stabilized-chlorine water circuits and residual management.
Appearance and supplied form
Confirm the form before comparing specifications.
Check the required form, then compare the composition, specifications and test conditions of the specific grade.
Product forms to compare
Granules, powder and compressed tablets; anhydrous and dihydrate grades separate
White to off-white
Appearance information supports initial screening only. Color cannot establish chemical identity, concentration or quality grade. Confirm the actual batch using supply documents and samples.
Appearance and technical references
These public sources help check product categories, possible appearances and general application limits. They do not replace the TDS, SDS or batch COA for a specific ENVO grade.
- FUJIFILM Wako · Sodium Dichloroisocyanurate
White to off-white granules
- OxyChem · Towerchlor56 Granules SDS
Identifies SDIC dihydrate granules; distinguishes them from anhydrous salt and TCCA
- ENVO Chemical · Sodium Dichloroisocyanurate ENVO original catalogue
Associates the product page with a historical photograph; does not establish the current batch or the rights chain
- Yuncang Water Technology · Manufacturer product page and image association
Verifies only the product and form identified with the image; third-party formulations, specifications, certifications, performance and commercial rights are not transferred
Application issues and troubleshooting
Sodium Dichloroisocyanurate — troubleshooting checks
Review symptoms, possible causes and verification steps together to prepare a more focused product-selection discussion.
01Sodium dichloroisocyanurate does not match the existing dosing equipment
- Possible causes
- Granular, tablet or liquid form, activity basis or the unit's specified chlorine source differ.
- Investigation and resolution
- Check the feeder's specified chemical and form first, then compare the actual label, available-chlorine tests and equipment procedures.
- Checks required
- Feeder model, feedstock label, SDS, available-chlorine units and supply form.
- Application limits
- Do not mix TCCA, SDIC, calcium hypochlorite or other incompatible chemicals; white appearance does not establish interchangeability.
02Available chlorine or residual behavior changes during storage and operation
- Possible causes
- Storage temperature, time, contamination or chlorine-demanding water constituents may change.
- Investigation and resolution
- Separate dispatch content, site storage and system demand; check test timing and the residual measurement method.
- Checks required
- Batch COA, production/arrival/sampling dates, storage conditions, raw-water and residual records.
- Application limits
- Do not judge available chlorine by liquid color or powder whiteness, or give a universal dosing ratio across products.
03Disinfection use does not match the documents
- Possible causes
- Swimming pools, wastewater, drinking water and hot tubs have different procedures and end-use requirements.
- Investigation and resolution
- Select documentation for the actual water use, checking materials, residuals and by-product monitoring.
- Checks required
- Use location, existing procedures, product documents, materials and monitoring plan.
- Application limits
- Industrial or swimming-pool use does not automatically extend to all drinking water, hot tubs or aquaculture water.
Applications
See where this product fits.
Technical documentation
Get the information your purchasing decision needs.
Technical data sheet
Product properties, test basis and specification details.
Safety data sheet
Composition, handling, storage and transport information.
Certificate of analysis
Batch-specific analytical items and results.
Certification & use documents
Review the scope for the product and destination market.
Packaging & delivery
Reference packaging: 25kg/bag or 50kg plastic drum. Actual packaging, labels and filled net weight are subject to the order and delivery documents.
Technical references & scope
- WHO: Sodium Dichloroisocyanurate Background Document
- US CDC: Pool and Hot-Tub Water-Treatment Guidance
Industry references describe general uses. Product specifications, certifications and application results require the corresponding supplier documentation.
More questions, answered.
Sodium dichloroisocyanurate does not match the existing dosing equipment — what should I check?
Check the feeder's specified chemical and form first, then compare the actual label, available-chlorine tests and equipment procedures.
What should I compare when buying Sodium Dichloroisocyanurate?
Share the application, current product, purchase quantity and delivery location to help confirm a suitable specification. Key checks include: Hydration form, available-chlorine basis, particle size, moisture and end-use requirements. Compare the current grade document and the same test basis before choosing an alternative.
Which documents should accompany a Sodium Dichloroisocyanurate enquiry?
Request the current grade-specific TDS and product SDS, the COA for the actual supplied batch, and any intended-use documents required for the destination. Share the application, specification, quantity and delivery requirements. Document version, batch coverage and public-release scope are confirmed for the specific request.
ENVO CHEMICAL
Discuss your water treatment needs
Share your application, current product or purchasing requirements to discuss a suitable supply option.