Product selection support
Discuss water conditions, process position and current products.
Source photograph; appearance, grade and supplied packaging follow the agreed product documents.
Chelation & metal-ion management
Disodium EDTA
EDTA-2Na
Disodium EDTA for metal-ion control in suitable cleaning and formulation systems.
Confirmed availableBase chemicals
- Chemical identity
- Disodium salt; distinguish the anhydrous form from the dihydrate.
- Product form
- White crystalline powder; confirm the supplied hydration form.
Add application & specification details
Application value
Uses and application conditions
Equipment cleaning, maintenance & prefilming; RO/NF cleaning
Use these checks to compare equivalent supply specifications and narrow the candidate range for your actual process.
Specification & document coordination
Align specification basis, test methods and grade-specific documents.
Packaging & supply coordination
Review quantity, packaging and destination requirements.
Specifications & selection
Specifications and order requirements
Discuss your current grade or operating conditions. ENVO codes identify sales requirements; manufacturer grades, supply specifications, test methods and document versions are confirmed for the selected product.
ENVO-EDTA-2N-SDisodium-salt enquiry reference
Legacy assay ≥99.5% must be confirmed together with hydration form and test basis.
Application conditions & technical scope
Disodium, tetrasodium and acid forms differ in dissolution and pH conditions. Compare hydration, assay basis and the actual formulation.
Appearance and supplied form
Confirm the form before comparing specifications.
Check the required form, then compare the composition, specifications and test conditions of the specific grade.
Product forms to compare
Disodium dihydrate crystalline powder
White
Appearance information supports initial screening only. Color cannot establish chemical identity, concentration or quality grade. Confirm the actual batch using supply documents and samples.
Appearance and technical references
These public sources help check product categories, possible appearances and general application limits. They do not replace the TDS, SDS or batch COA for a specific ENVO grade.
- Nouryon · Dissolvine NA2 data sheet
Disodium dihydrate is free-flowing white crystals
- ENVO Chemical · Disodium EDTA ENVO original catalogue
Associates the product page with a historical photograph; does not establish the current batch or the rights chain
Application issues and troubleshooting
Disodium EDTA — troubleshooting checks
Review symptoms, possible causes and verification steps together to prepare a more focused product-selection discussion.
01Disodium EDTA dissolution or formulation pH differs from expectations
- Possible causes
- Acid/sodium-salt form, hydration state or formulation conditions may differ.
- Investigation and resolution
- Confirm acid/salt and water-of-crystallization bases first; compare dissolution under the same formulation conditions.
- Checks required
- Actual chemical identity, assay basis, preparation-water quality, pH and process.
- Application limits
- EDTA acid, disodium and tetrasodium salts are not interchangeable at equal mass.
02Metals remain in the water after adding a chelant
- Possible causes
- Chelation changes metal speciation; it does not itself precipitate or remove metals.
- Investigation and resolution
- Distinguish metal-control formulations from wastewater removal. Assess decomplexation/capture and downstream separation separately for complexed metals.
- Checks required
- Metal valence, chelants, COD and existing reaction/separation process.
- Application limits
- Do not market a chelant directly as a heavy-metal removal agent or a discharge guarantee.
03Disodium EDTA assay and moisture bases differ between reports
- Possible causes
- Dihydrate/anhydrous basis, drying conditions or assay calculations may differ.
- Investigation and resolution
- Compare batch documents on the same hydration and test basis before assessing dissolution and formulation behavior.
- Checks required
- Supplied salt form, assay calculation basis, moisture/loss-on-drying method and actual formulation conditions.
- Application limits
- Dihydrate appearance cannot establish anhydrous assay; compare acid, disodium and tetrasodium forms separately.
Applications
See where this product fits.
Technical documentation
Get the information your purchasing decision needs.
Technical data sheet
Product properties, test basis and specification details.
Safety data sheet
Composition, handling, storage and transport information.
Certificate of analysis
Batch-specific analytical items and results.
Certification & use documents
Review the scope for the product and destination market.
Packaging & delivery
Reference packaging: 25kg/bag. Actual packaging, labels and filled net weight are subject to the order and delivery documents.
Technical references & scope
Industry references describe general uses. Product specifications, certifications and application results require the corresponding supplier documentation.
More questions, answered.
Disodium EDTA dissolution or formulation pH differs from expectations — what should I check?
Confirm acid/salt and water-of-crystallization bases first; compare dissolution under the same formulation conditions.
What should I compare when buying Disodium EDTA?
Share the application, current product, purchase quantity and delivery location to help confirm a suitable specification. Key checks include: Hydration form; Content reporting basis; Chelation value; pH test conditions; NTA & other impurities. Compare the current grade document and the same test basis before choosing an alternative.
Which documents should accompany a Disodium EDTA enquiry?
Request the current grade-specific TDS and product SDS, the COA for the actual supplied batch, and any intended-use documents required for the destination. Share the application, specification, quantity and delivery requirements. Document version, batch coverage and public-release scope are confirmed for the specific request.
ENVO CHEMICAL
Discuss your water treatment needs
Share your application, current product or purchasing requirements to discuss a suitable supply option.